ADVANCED IP-BASED EN 54-16 PUBLIC ADDRESS AND VOICE ALARM SYSTEM

NEO+ is an advanced EN 54-16 certified public address, background music and voice alarm system that offers maximum flexibility and power, with high‑performance features that put it at the forefront of state‑of‑the‑art technology.

Designed for medium to large installations, NEO+ reduces time and costs thanks to its plug‑and‑play philosophy, which facilitates all installation, maintenance and system operation procedures.

EVOLUTION IS WRITTEN WITH +

This is NEO+, designed with large projects in mind

Certified, reliable and robust

The NEO+ system is certified according to the international standard EN 54-16. NEO+ is reliable and effective in fire safety installations, a robust and highly durable equipment in any large-scale project. NEO+ also has other international certifications such as Civil Defense in the Middle East or EAC.

Scalable and easy to use

NEO+ follows the plug-and-play philosophy that reduces installation and maintenance costs by including everything needed to manage a public address and voice evacuation installation in a single unit. It can be easily scaled up using 4- and 8-channel NEO+ Extension units to reach up to 1024 zones in a single system. In multi-controller mode, NEO+ can work without zone limitation.

AES67/Dante® Technology

The NEO+ system includes a communications module based on AES67 technology for digital audio transmission at network level 3. This protocol allows interoperability between different systems based on audio over IP, in addition to being an open standard that can be used without relying on more expensive proprietary technologies.

Dual redundant controller

NEO+ incorporates redundant controller functionality to back up the core of the system and secure it against any type of failure or incident in the installation. Two NEO-8060+ main controllers can be connected in a ring so that one operates as the main unit and the second as the backup unit.

EVAC Control: EN 54 local management and supervision

EVAC Control is a management and supervision platform for local single-site and multi-site EN 54 NEO+ and NEO local public address and voice evacuation systems. Through an eCore industrial hardware device, the application offers public address and background music functions and a calendar module for scheduling pre-recorded messages.

EVAC Cloud: EN 54 remote connection and supervision

EVAC Cloud enables EN 54 remote monitoring and connection for alarm management in NEO+ and NEO systems. The platform offers secure remote access for advanced configuration functions through NEO Configurator using an eCore industrial hardware device.

FRONT PANEL WITH TOUCH INTERFACE FOR SMOOTH AND EASY OPERATION

Intuitive use and full control from the central unit

4.3″ color touchscreen display

Display with dark mode and access control to the main functions of the system. Fast and intuitive use with icons and without text.

Front monitoring speaker

Integrated front monitoring speaker for listening to audio inputs, zone routing and pre-recorded messages.

Supervised emergency microphone

Integrated high quality, supervised Push-to-Talk (PTT) microphone (connection and capsule).

Internal digital audio matrix

8×8 audio matrix (up to 1024 zones), allowing any of the inputs to be routed simultaneously and independently to any of the zones.

Dual pre-recorded message player

NEO+ has 4 Gb of internal memory to store over 600 minutes of pre-recorded messages that can be played manually or automatically. Up to two messages can be played simultaneously to different zones.

Show Features

+4.3″ color touchscreen display
Display with dark mode and access control to the main functions of the system. Fast and intuitive use with icons and without text.

+Front monitoring speaker
Integrated front monitoring speaker for listening to audio inputs, zone routing and pre-recorded messages.

+Supervised emergency microphone
Integrated high quality, supervised Push-to-Talk (PTT) microphone (connection and capsule).

+Internal digital audio matrix
8×8 audio matrix (up to 1024 zones), allowing any of the inputs to be routed simultaneously and independently to any of the zones.

+Dual pre-recorded message player
NEO+ has 4 Gb of internal memory to store over 600 minutes of pre-recorded messages that can be played manually or automatically. Up to two messages can be played simultaneously to different zones.

REAR PANEL WITH ALL ADVANCED CONNECTIONS

IP Layer 3 AES67 digital audio, DSP equalizer, 8 class D amplifiers and much more

8 class D amplifiers

8 x 120W @100V configuration allowing up to 8 zones with a single unit.

Backup power input 24 V DC

Connection with EN 54-4 battery charger.

Interface by contact closures with fire detection panel

12 supervised closures, input, output and per zone.

8 outputs for attenuators control

24V outputs to automatically disable up to 32 volume attenuators.

Line supervision and backup amplifier

NEO+ can detect open or short circuits on all lines and optionally allows the eighth amplifier to be used as a backup for the rest.

ACSI bus interface

ACSI port for up to 32 bus devices. ACSI Net protocol for up to 128 devices and up to 4096 (32×128) ACSI v2 devices.

5 balanced analog audio inputs

Audio inputs can be independently routed to each zone thanks to the internal digital matrix (40×1024). In addition, NEO+ can receive up to 32 additional audio inputs.

8 inputs for end-of-line devices

NEO+ allows the addition of line termination devices to detect possible line faults.

14 GPIO ports for integrations

Thanks to the event manager included in NEO+, signals received by contact closures can be combined by means of logical operations to execute actions in the equipment.

8 preamplified audio outputs

8 audio outputs that duplicate the signal sent to the amplifiers/zones.

RS-485 port for integrations

Allows to easily receive or send RS-485 commands for advanced integrations.

RS-485 interface with fire detection panel

Dedicated RS-485 port for advanced integrations with fire detection panels.

Triple Ethernet interface

NEO+’s triple Ethernet port is configurable and uses FlexNet technology with AES67 Layer 3 IP digital audio, remote control and monitoring. The system can scale with NEO+ Extension in loop mode up to 1024 zones and 128 devices.

Show Features

+8 class D amplifiers
8 x 120W @100V configuration allowing up to 8 zones with a single unit.

+A+B lines on each amplifier
NEO+ has a total of 16 amplifier lines allowing the use of one or two speaker lines per amplifier for increased redundancy.

+Attenuator control
NEO+ allows sending priority signals to 8 different zones to disable up to 24 attenuators.

+Integration with third parties: 14 GPIO, RS-485 or Ethernet (UDP)
Whether by contact closure, serial port or Ethernet commands, NEO+ easily integrates with third party equipment.

+Recording output
Allows monitoring and recording of messages emitted from the emergency microphone.

+Advanced event management
Using the NEO Configurator software, events can be created and stored by NEO+ to perform actions on the system. Examples: playing a message periodically in a set of zones during specific days and times, lowering the volume of several zones when a network command is received, playing a message in a zone when a microphone button is pressed, etc.

+5 balanced audio inputs
Inputs for music sources or microphones.

+ Audio over Ethernet
NEO+ can receive up to 32 different inputs simultaneously in high quality digital audio (48Khz, 24bits) and send audio over Ethernet to any of the zones in the system.

+40×1024 digital audio matrix
NEO+ can route any of the inputs to any of the zones simultaneously and thus have differentiated audio per zone.

+Backup amplification (7+1)
NEO+ can use its amplifier #8 as a backup amplifier for the rest.

+DSP for filtering and parametric equalization
NEO+ allows you to apply filters or 7-band parametric equalization to both inputs and outputs.

+Pre-recorded messages (4 GB of internal memory)
Allows to store more than 600 minutes (up to 99 messages).

+ 12 supervised contact closures for integration with fire detection panel.
Two input closures, two output closures and eight input closures.

+Pre-amplification outputs
Eight low-level outputs for connection to external PA amplifiers or active loudspeakers.

+ACSI port
Allows up to 32 MPS-8Z+, MPS-8Z microphones or VAP-1 panels to be bus connected via UTP cable.

+Speaker line supervision
NEO+ measures the status of the loudspeaker lines from its amplifiers and allows the optional use of EOL at the end of the line.

A system that expands in a smart way

With one NEO+ unit, up to 1024 zones can be covered in a single system using NEO+ Extensions.

NEO+ Extension 8250

Amplification Channnels / Extra Zones

250

Power per amplification channel (W)

2000

Total max. power (W)

NEO+ Extension 4250

Amplification channels / Extra zones

500

Maximum power per channel (W)

1000

Total max. power (W)

NEO+ Extension 4500

Amplification channels / Extra zones

1000

Maximum power per channel (W)

2000

Total max. power (W)

MAKE IT BIGGER WITH NEO+ EXTENSION

NEO+ 4250E

Extension unit and amplifier with 4 channels and 1000 W total (flexible power sharing, 500 W max. per channel) for the EN 54-16 PA/VA system NEO+.

NEO+ 8250E

Extension unit and amplifier with 8 channels and 2000 W (250 W per channel) for the EN 54-16 PA/VA system NEO+.

NEO+ 4500E

Extension unit and amplifier with 4 channels and 2000 W total (flexible power sharing, 1000 W max. per channel) for the EN 54-16 PA/VA system NEO+.

NEO+ 4500LE

Extension unit and low impedance amplifier with 4 channels of 500 W @4ohm per channel for the EN 54-16 PA/VA system NEO+.

Download the NEO+ Brochure

Download

NEO+ / NEO ACCESSORIES TO GO FURTHER

AES67 and ACSI Net Converter NEXO

AES67 network audio converter and ACSI v2 bus controller for connecting up to 32 MPS‑8Z, MPS-8Z+ or VAP‑1 devices.

Multi-Zone Microphone MPS-8Z+

Multi-zone microphone with ACSI v2 protocol for connecting up to 32 devices on one bus.

Expansion Keyboard MPS-8K+

EN 54 expansion module for the MPS-8Z+ microphone with 8 programmable buttons in ACSI v2.

Battery charger EQ-241976

960 W battery charger for voice evacuation systems, EN 54-4 compliant.

Battery charger EQ-241977

3600 W battery charger for voice evacuation sytems, EN 54-4 compliant.

Battery EQ-241978

45 Ah @ 12 V battery for 960 W EQ241976 charger.

Battery EQ-241994

120 Ah @ 12 V battery for 3600 W EQ241977 charger.

Wall controller VCC-64

Wall controller to select the audio source and change the volume in the zone where is located.

Power adapter VCC-64PSK

RJ-45 communication and power supply adapter for VCC-64.

Dante-AES67 Converter Dante-16

Dante-AES67 digital audio converter to convert up to 16 channels.

Integration Interface Direct Link

Device for integrating fire detection systems with NEO+ and NEO systems.

Voice Alarm Panel VAP1-FES

EN 54 voice evacuation panel with advanced functionalities and status monitoring by zones.

Voice Alarm Panel with Keypad VAP1-FES 7Z

EN 54 voice evacuation panel with 7-zone expansion keypad.

7-Zone Extension VAP1-FES ERW 7Z

Expansion keypad with 7 zones and red IP30 housing.

14-Zone Extension VAP1-FES ERW 14Z

Expansion keypad with 14 zones and red IP30 housing.

Network Switch SWT4E-2F

Enables the configuration of IP communication networks between EN 54 devices.

Media converter EQ-201035

Enables configuration of IP communication networks between EN 54 devices.

NEO+ / NEO / ONE ACCESSORIES, VERSATILE AND RELIABLE

Microphone MPS-8Z

High performance digital paging station with “all-call” button, busy line signal, auto-lock function and event button.

Expansion keyboard MPS-8K

Keyboard expansion unit for the MPS-8Z microphone, it adds 8 extra programmable buttons.

Microphone A-1

High performance desktop microphone with lighting indicators and different operational modes.

EOL device TFL-2

Filtered load impedance to improve the accuracy of loudspeaker line measurement in 70/100 V lines.

Voice alarm panel VAP-1

Voice alarm panel that offers a remote and supervised control of the NEO’s VA features.

Expansion keyboard VAP-8K

Keyboard expansion unit for the VAP-1 voice alarm panel, it adds 8 programmable buttons.

Blank block VAP-1EC

Blank block for voice alarm panel VAP-1 that can be used both in rack and installed on the wall.

Wall-mounted cabinet RACK-4ALT

19″ and 4U cabinet with glass front door and lock, all blank panels and required accessories.

Wall-mounted cabinet RACK-6ALT

19″ and 6U cabinet with glass front door and lock, all blank panels and required accessories.

Red Wall-Mounted Cabinet EQ-242057

Wall cabinet for housing a VAP-1 microphone unit and a VAP-8K keyboard extension.

Multisource Player RCD-21R

All-in-one multi-source audio player with USB and SD card.

Attenuators AT Series

Attenuators for high impedance public address lines of 70 or 100 V.

Suface mount back box for series AT attenuators

Surface box for attenuators MC-20EC

Box for surface mounting of AT series attenuators.

CONTROL AND SUPERVISE ALL YOUR EN 54 SYSTEMS LOCALLY AND REMOTELY

The NEO+ system can be controlled and monitored both locally and remotely thanks to the EVAC Control and EVAC Cloud platforms. With the NEXO accessory, AES67 audio sources and up to 32 additional devices can be added per NEXO unit.

Multi-site configuration of a NEO+ system

ADVANCED IP-BASED EN 54-16 PUBLIC ADDRESS AND VOICE ALARM SYSTEM

EVOLUTION IS WRITTEN WITH +

This is NEO+, designed with large projects in mind

Certified, reliable and robust

Scalable and easy to use

AES67/Dante® Technology

Dual redundant controller

EVAC Control: EN 54 local management and supervision

EVAC Cloud: EN 54 remote connection and supervision

FRONT PANEL WITH TOUCH INTERFACE FOR SMOOTH AND EASY OPERATION

Intuitive use and full control from the central unit

REAR PANEL WITH ALL ADVANCED CONNECTIONS

IP Layer 3 AES67 digital audio, DSP equalizer, 8 class D amplifiers and much more

A system that expands in a smart way

NEO+ Extension 8250

NEO+ Extension 4250

NEO+ Extension 4500

MAKE IT BIGGER WITH NEO+ EXTENSION

Download the NEO+ Brochure

NEO+ / NEO ACCESSORIES TO GO FURTHER

NEO+ / NEO / ONE ACCESSORIES, VERSATILE AND RELIABLE

CONTROL AND SUPERVISE ALL YOUR EN 54 SYSTEMS LOCALLY AND REMOTELY

The NEO+ system can be controlled and monitored both locally and remotely thanks to the EVAC Control and EVAC Cloud platforms. With the NEXO accessory, AES67 audio sources and up to 32 additional devices can be added per NEXO unit.

Documentation: Discover NEO+ Technical Features

Brochure

Certificate

Datasheet

Downloads