=========================================================================
= CHANGELOG NEXO Config Tool                                            =
=========================================================================

*** v01.03.00 (08/06/2026) *******************************************
Power Config:
	- Added a new "Power Config" window for device power-supply monitoring, including device power inputs and external EPS supervision via GPIO.
	- Includes real-time telemetry of device power input states and voltages (Main, Emergency, PoE).
	- Inluded Power Config parameters on configuration import/export files.
	- Available on firmware v01.03.xx.xx and higher.

Ethernet Monitor:
	- New Ethernet Monitor window now available.
	- Includes link status per Ethernet port, live Rx/Tx packet counters, and IGMP/PTPv2 status.

NEXO-HUB / ACSINet Cluster:
	- Added Cluster-Receiver gateway to ACSIv1 sites (firmware v01.03.xx.xx and higher).
	- Improved Cluster Sender/Receiver live monitor visualization and refresh behavior.
	- Improved ACSINet cross-validation (Domain vs Cluster ID, gateway conflicts, Virtual Mic and Zone Monitor incompatibilities).
	- Fixed false cluster-configuration warning on the first ACSINet edit confirmation.

ACSI Local Bus:
	- Added local ACSI bus topology selection (single/dual branch modes), available from firmware v01.03.xx.xx and higher.
	- Added ACSI input port information for connected microphones in runtime views.

General:
	- Added "Reset Errors" button on the Device window.
	- Improved GPIO cross-validation: blocks assigning pins already in use by other modules.
	- Fixed login "remember password on this machine" on initial access.
	- Improved visual consistency on NEXO-HUB, Ethernet and Power forms.
	- Audio and DSP channels are now locked according to the active ACSINet/HUB operating mode (domain sender, cluster sender/receiver, virtual mic, zone monitor, ACSIv1 gateway).
	- Fixed Level Detector "RMS-TC" and "Decay" behavior; decay unit corrected to dB/s.


*** v01.02.02 (11/09/2025) *******************************************
    - Fixed bug related to ACSI local bus devices installation.


*** v01.02.01 (07/08/2025) *******************************************
General:
	- Fixed bug with configuration export to file (app would give an error).
	- Modified password for L3 access.
DSP:
	- Added pre-gain control on the DSP window (to activate attenuator -6 dB or booster up to +24 dB).
ACSINet:
	- Added IP address information from other cluster devices in the live monitoring table.
	- Added help button to view multicast IP addresses used for our Cluster/Domain ID in ACSINet.
	- Improved ACSINet talk logger visualization.


*** v01.02.00 (02/06/2025) *******************************************
- Added NEXO-HUB devices and ACSINet Cluster compatibility.
- Added new "ACSINet Cluster" configuration tab within the "ACSI & ACSINet" window (NEXO-Hub license needed on the NEXO unit).
- Added ACSINet Virtual-Mic functionality.
- Added DSP configuration window which includes high-pass filters and level detector for inputs, appart from graphical equalizers.
- Added ACSINet Mic Talk operation monitor feature.
- Improved ACSINet configuration error detection and warning messages.
- Improved live parameter visualization (e.g., signal vumeters).
- Improved communication link between application and NEXO devices.
- Improved AES67 module monitor.
- PTP configuration has been moved to the AES67 Module subform.


*** v01.00.02 (21/01/2025) *******************************************
- Added capability to view the status and mount SD and USB units.
- Improved GPIO port control and visualization.
- Improved VLAN configuration interface.
- Improved audio parameters visualization from the app (including config and runtime values).
- Added new factory testing tools.
- Improved visualization of the app when using scaling on the screen.


*** v01.00.01 (19/12/2024) *******************************************
- Added NEXO import/export functionality. No it is possible to backup and restore the device's configuration.
- Improved audio configuration window.
- Improved firmware update process.
- Added factory-testing tools.
- Improved app design.
- Added LDA discover window.
- Added log export to file functionality.


*** v01.00.00 (05/11/2024) *******************************************
- First stable version. Available functionalities listed below.
- NEXO basic configuration: device parameters, factory-reset, etc.
- Network parameters configuration. (IP address, VLANs, PTP, ...)
- Audio configuration: physical audio ports and AES67 tx/rx slots.
- ACSINet:
    * Sender Domain configuration.
    * Domain live status monitoring.
    * ACSI local bus configuration. Installation of ACSI devices.
- Audio Monitor: monitoring of both physical and AES67 audio sources.
- GPIO & serial ports configuration. 
- Internal device's log and live errors monitoring.
- Password protected user access.
- NEXO firmware update capability.
