---
title: "Advantages of the LDA NEO+ system in multiservice and multi-site networks"
description: "LDA NEO+ is designed for efficient integration into complex data networks, especially in multiservice and multi-site environments"
url: https://lda-audiotech.com/en/2025/04/22/advantages-neo-plus-multiservice-multisite-networks/
date: 2025-04-22
modified: 2025-07-03
author: "LDA Marketing"
image: https://lda-audiotech.com/wp-content/uploads/2025/04/LDA-NEO-Plus-NEXO-multisite-en.jpg
categories: ["Technical Blog"]
type: post
lang: en
---

# Advantages of the LDA NEO+ system in multiservice and multi-site networks

The LDA NEO+ system is designed for efficient integration into complex data networks, especially in **multiservice and multi-site** environments such as metro networks with multiple stations, airports with several terminals, or distributed industrial facilities.

### Precise synchronization via PTP and multicast addressing

One of the key features of LDA NEO+ is the precise synchronization of all network devices using **PTP (Precision Time Protocol)**, in compliance with the **IEEE 1588** standard.

PTP typically distributes time information using **multicast messages** over IP, allowing efficient and scalable synchronization across multiple nodes without generating redundant traffic. This time precision is critical in voice evacuation systems, where messages must be played **simultaneously and with imperceptible latency** across all zones.

### Compatibility with professional audio standards

The LDA NEO+ public address and voice evacuation system uses the [AES67 digital audio transport protocol](https://lda-audiotech.com/en/2022/08/05/advantages-aes67-audio-over-ip-en54-systems/), widely adopted in the professional audio sector.

This standard encapsulates audio into multicast streams, which is essential for **real-time transmissions**—similar to other leading protocols used in modern professional audio networks.

Unlike **unicast**, which does not scale well when a stream must reach multiple receivers, multicast minimizes latency and optimizes network resource usage.

### Integration into multiservice networks using VLANs and multicast routing

LDA NEO+ enables segmented integration into multiservice networks through **site-dedicated VLANs**. For example, each station in a metro network can operate on its own subnet, enhancing the security, efficiency, and overall performance of the network.

The system architecture supports **Layer 3 multicast routing** technologies, allowing devices to correctly receive multicast streams using:

- **IGMP Snooping**: to monitor multicast group subscriptions.
- **IGMP Filtering**: to restrict access to specific groups based on policies.
- **PIM (Protocol Independent Multicast)**: to route multicast traffic across network segments.

This approach reduces network load and enables granular, efficient control of audio streams.

### Inter-site traffic management with LDA NEXO HUB

The [**LDA NEXO HUB**](https://lda-audiotech.com/en/productos-lda/aes67-processor-card-nexo-hub/) device, installed at each site, enables **smart traffic management** between the central infrastructure and local subnets. Only calls directed to specific zones are forwarded to the corresponding sites.

Local audio sources remain confined to their environment, avoiding unnecessary traffic on the main network. This reduces congestion, improves **scalability**, and optimizes **system performance**.

### Planning to integrate NEO+ and NEXO into your network?

Check the technical document for architecture, traffic and security requirements:[NEO+ and NEXO Network Requirements](https://lda-audiotech.com/wp-content/uploads/2022/01/D028084-LDA_Handbook_EN_NEOplus-and-NEXO-Network-requirements.pdf)

### Multi-site made simple with NEO+ and NEXO Hub
